ProForm Universal European Clear 2.1VOC 5Liter kit,Hardener included. Low VOC medium solid superior clearcoat. This european formulation provides easy flowout, high gloss and superior finish. Can be used for spot, panel or overall finish. This clearcoat also offers excellent buffing properties. 5 L / 1.3 U.S.Gallon. MIXING DIRECTIONS: 2:1 For best results, use when temperature of the can and surface is between 21°C and 24°C (70°F and 75°F). This product is not recommended for use in temperatures below 16°C (60°F).

SURFACE PREPARATION:

Thoroughly dried finishes: Clean with Final Wipe. Sand with 600 to 1000 grit and clean again with Final Wipe. On freshly sprayed basecoat: follow manufacturer’s recommendations for top coating times before applying clearcoat. A flexible additive may be needed when painting flexible parts. Apply 2 full wet coats allowing 10 to 15 minutes flash time between coats.

1. Read all label directions, warnings and cautions for safe usage.

2. Mix Clearcoat and activator as per instructions on label.

3. Stir thoroughly between each addition. Strain before spraying material.

4. Keep cap closed at all times, exposure to atmosphere can affect performance of this product.

Clean all spray equipment immediately after use.

12292